The 2N3904 is basically an NPN transistor made up of silicon material. It is used for a general-purpose switch and amplifier. It supports the current up to 100mA when acts as a switch and It supports the frequency up to {Read More}
It is a small high volts shock circuit, pressure from the low current. It is best for fun play. In-circuit has a few tools just 2 small NPN transistors, 2 resistors, and 1 transformer. So easy to makes and cheap. {Read More}
The TIP32c is a PNP transistor. Because it has high collector current of about 2A,Tip32c transistor can be used for Power switching or large signal amplification. Transistor Tip32c is basically known for its high amplification ability because 2A is not {Read More}
The 2SA1943 is a PNP transistor originally from Toshiba. Due to the transistor high current gain and collector current it is very generally used in AF amplifiers or High power audio circuits. But now this Transistor is entirely from Toshiba {Read More}
The 2Sa1015 is PNP transistor which is mainly used for general purpose amplification. This transistor consists of three terminals: emitter, base and collector. N layer represents the base side and P layers represent emitter and collector. In the market 2sa1015-y, {Read More}
BC549 transistor: This is an NPN transistor so the collector and emitter will be on when supply small current to base. BC549 is a low current transistor so the max amount of current that could flow through the Collector pin {Read More}
The BC550 transistor is a general-purpose BJT transistor of the BC547 series. The transistors in this series are commonly used for wide purpose applications in commercial devices and also in academic and hobby electronic projects. This Transistor can be used {Read More}
2n2907 transistor is PNP Bipolar transistor available in metal can package, having a high 600mA value of current with low voltage of 40v. Transistor 2N2907 being is fully biased when positive current is given to base. This transistor is having {Read More}
The 2N7000 N-channel MOSFET is a small signal. These MOSFET’s are power electronic switches such as transistors, However, with a higher current and voltage grading. The 2N7000 MOSFET can be used to switch loads which works on less than 60V (VDS) {Read More}
BC558 is a transistor that can be used in many kinds of typical purpose applications. It can be used as for any kind of typical amplification or switching. For using it as a switch to drive load it can be {Read More}
Copyright © 2022 | WordPress Theme by MH Themes